Vape Connection Starter Kit instructions

This guide will take new users step by step on how to operate their new Vape Connection starter kit. Please note that the pictures of batteries and clearomizers may not be the same as the kit you purchased however they work the same in principal.

Getting started

Your kit will include all the relevant items to get started straight away. Batteries are normally shipped %70 charged however it is recommended that you charge them for 1-2 hours before using.

Charging your batteries.

1. To charge your batteries, connect the supplied USB eGo charger by screwing it into the battery.

2. Now connect the USB charger to the supplied AC power adapter or alternatively plug it into a PC USB slot,

3. The light on the charger will now be on. Red indicates charging.

4. Once the light turns green it indicates that the battery is fully charged and can be disconnected. Your battery is now ready for use.

Turning on/off your battery

1. The batteries come with a built in 5 click function. This stops the batteries accidently being used while in your pocket , bag etc. To turn on your battery rapidly press the button 5 times within 3 seconds.

2. If successful the battery light will flash. 

Filling your clearomizer

1. Your clearomizer houses the e-liquid to be vaporized. To fill your clearomizer hold it upside down and unscrew the bottom base. 

2. grap your bottle of e-liquid and open it. Tilt your clearomizer slightly and pour the e-liquid down side wall of the clearomizer. DO NOT pour e-liquid down the centre tube as this is the air flow. 

3. do not fill above the centre air flow tube. You can view the e-liquid filling up on the side.

4. While holding the clearomizer upside down, screw the base back into it firmly.

5. Let your e-liquid rest for a few minutes so the wicks can soak up the e-liquid,

Start Vaping

1. Once your battery is charged and your clearomizer filled, screw the clearomizer onto the battery.

2. Once the battery is on, simply press the button and inhale.